Used to fill the gap between handlebar grip and the switch housing. - Material: Neoprene - Outer diameter: 50mm - Inner diameter: 22 or 26mm - Thickness: 5mm - Slit for hand-cut Fits: > 22mm or 1 (25.4mm) handlebars
With a Wave style grip surface. Black rubber. Classic barrel shap. Compatible with 1 (25.4mm) diameter handlebars. Fits: > 74-22 H-D (excl. Street)
With a Waffle style grip surface. Black rubber. Classic barrel shap. Compatible with 1 (25.4mm) diameter handlebars. Fits: > 74-22 H-D (excl. Street)
12V compatible. Grip diameter independent wrap around system. The simplest way to install a set of grip warmers. Install when it's cold, remove in the summer. Just wrap around the handlebar grips, lace the warming pads and fasten to the handlebar grips.Comes with wiring, on-off switch and hardware as shown. Dimension of the warming pads approx. 105mm wide x 95mm high. Fits: > Universal
Black with silver aluminum ring. Grippy Grip non-slip GGDM-Cross grips. Fits handlebars with 7/8 / 22,2mm diameter. - Length 125 mm - Open end Fits: > 7/8 bars
A pair of black anodized adapters, used to mount bar-end style mirrors to 1 inch (25.4mm) handlebars that have a 19mm to 22.5mm inner diameter. - For handlebar I.D.19-22.5mm- Morror mount size dia. 30mm- Black anodized finish - CNC aluminum - Hex socket bolt (M6 x 45mm) - Sold in pairs Fits: >
Used to install handlebar-end mirrors to the end of the handlebars. Includes adapters and installation hardware for M16x1.5 threaded handlebar ends. Fits: > Yamaha-1 M16xP1.5
Used to install handlebar-end mirrors to the end of the handlebars. Includes adapters and installation hardware for M6x1.0 threaded handlebar ends. Fits: > Suzuki (M6xP1.0)
Used to install handlebar-end mirrors to the end of the handlebars. Includes adapters and installation hardware for M8x1.25 threaded handlebar ends. Fits: > Kawasaki (M8xP1.25)
Used to install handlebar-end mirrors to the end of the handlebars. Includes adapters and installation hardware for M6x1.0 threaded handlebar ends. Fits: > Yamaha-2 (M6xP1.0)
Used to install handlebar-end mirrors to the end of the handlebars. Includes adapters and installation hardware for M12x1.75 threaded handlebar ends. Fits: > BMW with M12xP1.75 threaded handlebars
M10 x 1.25 RHT / Right Hand Threaded (clock wise tightening). Used to plug the hole in the handlebar clamp when the mirror is removed. - Aluminum - Anodized finish Fits: >
M10 x 1.25 LHT / Left Hand Threaded (counter clock wise tightening). - Used to plug the hole in the handlebar clamp when the mirror is removed - Aluminum - Anodized finish Fits: >
Grippy Gripquot; non-slip GGDM-BASE grips. Fits handlebars with 7/8 / 22,2mm diameter. - Black with silver aluminum ring - Length 125 mm - Open end Fits: > 7/8 bars
- Used to install handlebar-end mirrors to the end of the handlebars - Includes adapters for 13.5 to 16mm ID and 16-19 ID handlebars that are not threaded on the inside - Mirror mount size dia. 30mm - Black anodized finish - CNC aluminum - Complete with required installation hardware Fits: > Universal for 7/8 OD handlebars with 13.5 to 19mm ID
Single port Slim aluminum USB-C charger. Clamps around 1 (25.4mm) handlebar. Complete with an adapter to fit 7/8 (22.2mm) diameter handlebars. - Aluminum housing - Black anodized finish - For USB-C charging - Input DC12V - Output 5V/3A, 9V/2A, 12V/1.5A - Max. 18W - For 7/8 (22.2mm) & 1 (25.4mm) handlebars - Incl. 22.2mm adapter included - Powers on with ignition key - Water-resistant when closed - CE approved Fits: > Universal for 1 (25.4mm) and 7/8 (22.2mm) handlebars