Grippy Gripquot; non-slip GGDM-BASE grips. Fits handlebars with 7/8 / 22,2mm diameter. - Black with silver aluminum ring - Length 125 mm - Open end Fits: > 7/8 bars
Grippy Grip non-slip GGDM-BASE grips. Fits handlebars with 7/8 / 22,2mm diameter. - Brown with silver aluminum ring- Length 125 mm - Open end Fits: > 7/8 bars
Black with silver aluminum ring. Grippy Grip non-slip GGDM-Cross grips. Fits handlebars with 7/8 / 22,2mm diameter. - Length 125 mm - Open end Fits: > 7/8 bars
With a Wave style grip surface. Black rubber. Classic barrel shap. Compatible with 1 (25.4mm) diameter handlebars. Fits: > 74-22 H-D (excl. Street)
With a Waffle style grip surface. Black rubber. Classic barrel shap. Compatible with 1 (25.4mm) diameter handlebars. Fits: > 74-22 H-D (excl. Street)
Used to fill the gap between handlebar grip and the switch housing. - Material: Neoprene - Outer diameter: 50mm - Inner diameter: 22 or 26mm - Thickness: 5mm - Slit for hand-cut Fits: > 22mm or 1 (25.4mm) handlebars
Gumové gripy řidítek. Sada obsahuje grip s průměrem 22mm a větší grip na plynovou rukojeť. Gripy nesou nápis DAYTONA.
12V compatible. Grip diameter independent wrap around system. The simplest way to install a set of grip warmers. Install when it's cold, remove in the summer. Just wrap around the handlebar grips, lace the warming pads and fasten to the handlebar grips.Comes with wiring, on-off switch and hardware as shown. Dimension of the warming pads approx. 105mm wide x 95mm high. Fits: > Universal
Pokud je mobilní telefon váš přítel na cestách, zásuvka Daytona vyřeší problém s dobíjením.
Pokud je mobilní telefon váš přítel na cestách, zásuvka Daytona vyřeší problém s dobíjením.
A pair of black anodized adapters, used to mount bar-end style mirrors to 1 inch (25.4mm) handlebars that have a 19mm to 22.5mm inner diameter. - For handlebar I.D.19-22.5mm- Morror mount size dia. 30mm- Black anodized finish - CNC aluminum - Hex socket bolt (M6 x 45mm) - Sold in pairs Fits: >
USB-A lightning kabel od značky Daytona, pro váš iphone nebo Ipad.
M10 x 1.25 RHT / Right Hand Threaded (clock wise tightening). Used to plug the hole in the handlebar clamp when the mirror is removed. - Aluminum - Anodized finish Fits: >
M10 x 1.25 LHT / Left Hand Threaded (counter clock wise tightening). - Used to plug the hole in the handlebar clamp when the mirror is removed - Aluminum - Anodized finish Fits: >
Single port Slim aluminum USB-C charger. Clamps around 1 (25.4mm) handlebar. Complete with an adapter to fit 7/8 (22.2mm) diameter handlebars. - Aluminum housing - Black anodized finish - For USB-C charging - Input DC12V - Output 5V/3A, 9V/2A, 12V/1.5A - Max. 18W - For 7/8 (22.2mm) & 1 (25.4mm) handlebars - Incl. 22.2mm adapter included - Powers on with ignition key - Water-resistant when closed - CE approved Fits: > Universal for 1 (25.4mm) and 7/8 (22.2mm) handlebars
White lens. Comes with sequential LED lighting (one lighting after the other, in a 'wave' like motion). Black painted aluminum body. The M8 threaded mount bolt with nut, allows virtually endless installation applications. ECE approved for front & rear use. Dimensions: 24mm head depth x 19.6mm head width x 89.5mm installed height x 114.5mm overall length. Fits: >