Gloss black. An ABS reproduction styled fairing with a plexiglass (acrylic) windscreen. Fork mounted fairing for FXR, Dyna and Sportster models with 39mm fork tubes and equipped with a docking hardware kit (note). Included is a universal mounting bracket. Offers hard core looks and minimized wind fatigue at highway speeds. Fairing replaces 57070-97DH. Note: H-D models require the installation of the OEM docking hardware kit 58164-96A for detachable windshields, which is not available through motorcycle St
Gloss black ABS fairing. With mounting bracket and hardware. Mounts to H-D models with the stock top headlamp mount, with mounting points 4-1/4 (10.9cm) apart. For use with the stock 5-3/4 headlamp. Approx. dimensions: 14 (35.6cm) overall height, 10 (25.4cm) wide at widest point, 6-1/2 (16.5cm) wide at top. Fits: > Most 73-20 XL, FX; 92-17 Dyna. With OEM top headlamp mount with 4-1/4 center to center mount points
Gloss black unpainted ABS fairing with integrated headlamp grill. With mounting bracket and hardware. Mounts to H-D models with the stock top headlamp mount, with mounting points 4-1/4 (10.9cm) apart. For use with the stock 5-3/4 headlamp. Approx. dimensions: 14 (35.6cm) overall height, 10 (25.4cm) wide at widest point, 6-1/2 (16.5cm) wide at top. Fits: > Most 73-up XL, FX; 92-17 Dyna. With OEM top headlamp mount with 4-1/4 center to center mount point
Gloss black ABS fairing with tinted plexiglass (acrylic) windshield. Compatible with 5-3/4 headlamps. A mounting bracket is not included and existing bracket must be modified to or a custom motorcycle specific bracket fabricated. Approximate dimensions: Overall width of the plexiglass headlamp shield 5.8 (14.7cm). Overall width at handlebar cut-outs approx. 12.6 (32cm), at windscreen (widest point) 14.2 (36cm). Overall depth 14.5 (36.8cm). Overall height 13.5 (34.3cm). Fits: > Univ.
Gloss black. Heavy duty ABS construction. Batwing style outer fairing for stock style replacement. Note: Fitment checks are required before painting and final assembly. Fits: > 96-13 FLT/Touring (excl. FLTR) (NU)
Chrome. Compatible with bikes equipped with Batwing style fairings. Designed to freshen-up the looks, or to give a different finish. Mounts below the fairing over the fork tubes. Fits: > 14-21 Touring with Batwing fairing (excl. Trikes)
Black. Compatible with bikes equipped with Batwing style fairings. Designed to freshen-up the looks, or to give a different finish. Mounts below the fairing over the fork tubes. Fits: > 14-21 Touring with Batwing fairing (excl. Trikes)
12 Volt, 20Ah. 320 CCA (Cold Cranking Amps). Dimensions: 176mm long x 87mm wide x 155mm high. Best bang for your buck. The Quality AGM (Absorbed Glass Mat) sealed batteries of the MCS Standard Series. Maintenance free (just keep them charged). No liquid. Vibration and heat resistant and a very low self discharge rate. Will out-power virtually all conventional lead-acid and gel batteries of identical dimensions. OEM replacement reference 65989-97D, 66000207, 65989-97E, 62600065, 66000207, 66000065A. Note b
Direct replacement with improved spark performance over the OEM ignition coil. Replaces OEM 4010425 for Indian and Victory. Also replaces the coil as supplied in OEM 2876049 Indian oil set. Fits: > Indian: 14-22 (excl. Scout, FTR, Challenger).
310CCA (Cold Cranking Amps). The MCS 'Advance Series' AGM batteries, synonym for a great battery. These high-end Motorcycle Storehouse AGM (Absorbed Glass Mat) 'Advance' batteries are of excellent quality, sealed and maintenance free (just keep them charged). They offer low internal resistance, less heat build-up and a strong starting capacity, much better than compatible flooded acid type batteries. AGM batteries are charged during production but will require a re-charge before installation. Height 155mm
Low profile pop-up design, to replace the standard screw-in fuel cap. Installs with a screw-in insert that mounts in the tank. In this the pop-up gas cap is installed to allow a flush mount, super low profile. The trim ring is self-adhesive and give the finished touch. To open cap, just push for the filler cap to come up and screw filler cap open. Gives a good grip so works with or without gloves. Set includes insert, gas cap and trim ring. Fits: > 98-22 XL Sportster (excl. 04-10 XL1200C) with 3.3G (12
Low profile pop-up design, to replace the standard screw-in fuel cap. Installs with a screw-in insert that mounts in the tank. In this the pop-up gas cap is installed to allow a flush mount, super low profile. The trim ring is self-adhesive and give the finished touch. To open cap, just push for the filler cap to come up and screw filler cap open. Gives a good grip so works with or without gloves. Set includes insert, gas cap and trim ring. Fits: > 98-22 XL Sportster (excl. 04-10 XL1200C) with 2.1G/7.9
Chrome; One-piece construction; Comes with welded-on side plates; Quick detachable; Requires model specific docking points & hardware kit Fits: > 10-17 FXDWG, FXDF (NU)
Chrome; One-piece construction; Comes with welded-on side plates; Quick detachable; Requires model specific docking points & hardware kit; Compatible with 53928-05, 51587-05 and 51687-06 backrest pads. Note: Requires OEM 53930-03B docking hardware kit. Fits: > 05-17 FLST/N/NSE, FLSTSC; 00-06 FLSTF; 00-05 FXST/B/S (NU)
Gloss black; One-piece construction; Comes with welded-on side plates; Quick detachable; Requires model specific docking points & hardware kit; Compatible with 53928-05, 51587-05 and 51687-06 backrest pads Fits: > 05-17 FLST/N/NSE, FLSTSC; 00-06 FLSTF; 00-05 FXST/B/S (NU)