Datový terminál s integrovaným snímačem 1D/2D kódů SE4710, OS Android 10, připojení přes WiFi 5, Buletooth 5.0 a NFC, vestavěný GPS modul, tlačítko pro PTT. Ovládání přes 5” dotykový displej. Podpora Mobility DNA. Certifikace IP67 a MIL-STD 810G, Černá.
Datový terminál s integrovaným snímačem 1D/2D kódů SE4710, OS Android 10, připojení přes WiFi 5, Buletooth 5.0 a NFC, vestavěný GPS modul, tlačítko pro PTT. Ovládání přes 5” dotykový displej. Podpora Mobility DNA. Certifikace IP67 a MIL-STD 810G, Černá.
Datový terminál s integrovaným snímačem 1D/2D kódů SE4100, OS Android 10, připojení přes WiFi 5, Buletooth 5.0 a NFC, GPS modul, tlačítko pro PTT. Ovládání přes 5” dotykový displej. Podpora Mobility DNA. 5400 mAh. Certifikace IP67 a MIL-STD 810G, černá.
Datový terminál s integrovaným snímačem 1D/2D kódů SE4100, OS Android 10, připojení přes WiFi 5, Buletooth 5.0 a NFC, vestavěný GPS modul, tlačítko pro PTT. Ovládání přes 5” dotykový displej. Podpora Mobility DNA. Certifikace IP67 a MIL-STD 810G, černá.
Nabíjecí a komunikační stanice pro datové terminály Zebra TC21 a TC26, 1 slot pro nabíjení a ethernetové připojení s neuvěřitelnou rychlostí přenosu dat až 1 GB/s, montáž do standardního 19” regálového systému pomocí BRKT-SCRD-SMRK-01. Černá barva.
Vybavení terminálu: 6.22 , 3+32 GB, WiFi, 4G, 80mm label, Android 11, 13MP Camera, 2D scanner, NFC, SD Mobilní datový termiál včetně integrované termotiskárny 80mm pro skladové operace k nadřazenému skladovému systému POHODA. Tisk na termo-kotouč 57 nebo 80mm tisk regálových termoetiket 57/25 nebo 57/43 mm Terminál podporuje tyto skladové operace: - Náhled zboží - kontrola - Objednávka zboží - Příjem zboží - Převod na jinou provozovnu - Vratka na centrální sklad - Odpis zboží - Částečná invent
Wireless controller set for ANTARI unit Z-1200IIReciever and transmitter for controlling (on/off) the Z-1200II Transmitter works up to a distance of 50 m (depending on the room) 1 transmitter can control up to 6 units Receiver with 4-pin XLR connector Operation with 12 V battery, type 23 A (included) License-free and approved in the EU Remote controlBattery: 1 x battery 12 V AR23 zinc air built-in .spc { line-height: 1.4;}Technické parametryCable length 0,35 m Carrier frequency 433,920 MHz Weight 0
Wireless controller for ANTARI units Z-1500II and Z-3000IIControl module with the same functions as the Z-20 and separate transmitter Transmitter works up to a distance of 50 m (depending on the room) Simultaneous control of an unlimited number of machines Control module with 5-pin XLR connector and 2 m cable Operation with 12 V battery (included) License-free and approved in the EU Remote controlBattery: 1 x battery 12V LR27 alkaline manganese built-in .spc { line-height: 1.4;}Technické parametryCa
Control module with the same functions as the M-20 and separate transmitter. Transmitter works up to a distance of 50 m (depending on the room). 1 transmitter can control several machines simultaneously. RF address selection enables 9 groups with an unlimited number of machines. Control module with 5-pin XLR connector and 2 m cable. Operation with 12 V battery, type 23 A (included). License-free and approved in the EU. .spc { line-height: 1.4;}Technické parametryTransmitter Carrier frequency UHF 433.920 M
Wireless controller set for ANTARI unit HZ-400Receiver and transmitter for controlling (on/off) the HZ-400 Transmitter works up to a distance of 50 m (depending on the room) 1 transmitter can control up to 6 units Receiver wtih 6.3 mm stereo jack Operation with 12 V battery, type 23 A (included) License-free and approved in the EU Remote controlBattery: 1 x battery 12 V AR23 zinc air built-in .spc { line-height: 1.4;}Technické parametryCable length 0,35 m Carrier frequency 433,920 MHz Weight 0,12 k
Basic DMX controller for 6 channels with master faderBasic DMX controller for convenient operation of light effect units with DMX512 interface (e.g. spotlights and dimmers) 6 channel faders for adjusting the DMX values 1 master fader Compact design 3-pin XLR connector Power supply via included power unit or 9 V battery (not included) Battery: 1 x 9.0 V E block Controller useable for: Luminaires up to 6 LED colors, Controls DMX effects, Luminaires for white Control: DMX Housing design: Desktop con
The QFC 5 is a high quality quick fix F connector with a very high degree of shielding to keep unwanted signals out. The F connector can be slid onto an f female connection. After the coaxial cable has been stripped, the connector can be installed easily and quickly with a push, turn and click movement. This article contains 5 pieces of QFC 5 in a package with detailed product description.
The QFC 5 is a high quality quick fix F connector with a very high degree of shielding to keep unwanted signals out. The F connector can be slid onto an f female connection. After the coaxial cable has been stripped, the connector can be installed easily and quickly with a push, turn and click movement. The QFC 5 now features a notch on both sides. For example, the connector can be easily mounted using a wrench. This item contains 50 pieces of QFC 5.
Power adapter for operating the fog machine M-1Consists of two parts: PSU and battery .spc { line-height: 1.4;}Technické parametryPower connection Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided) Weight 0,60 kg Device Battery pack type 1 x Lead 12 V, Input voltage 100-240 V AC, 50/60 Hz Output voltage 12 V DC Output current max. 5,8A DC output cable 2 m Velikost balení 20 x 14 x 7 cmHmotnost balení0.9 kg
Nedis® koaxiální WLAN anténní kabel HSR-200 s konektory SMA zástrčka – SMA zásuvka. Délka 10 m.Vysoce kvalitní měděný koaxiální kabel WLAN anténní kabel s nízkými ztrátami a PE pláštěm odolným vůči povětrnostním vlivům. Tento kabel je určen pro bezdrátové a širokopásmové komunikační aplikace. Provozní teplota se může pohybovat v rozsahu -40 °C až +85 °C.
Locking female cable connector, screw terminals. The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.