24 (61cm) long; Plug 'n Play handlebar extensions harness including all wires, including e-throttle wiring Fits: > Indian: 14-22 Chieftain, Roadmaster
Plug-n-Play harness to extend heated grip wiring with 24 inch (61cm) for all Indians equipped with heated grips Fits: > Indian: 14-22 Big Twin models with heated grips (excl. Scouts)
Wiring harness for connecting a trailer to the bike. These trailer isolator wiring harnesses isolates the electronics for the trailer from the motorcycle. The trailer isolator wiring comes with relays, which are triggered by the bike. But actual current is drawn directly from the battery so there is no current draw to interfere with the bike´s electrical system. The 4-wire isolator harness comes with a molded flat 4-pin connector, left/brake, right/brake, run & ground. Fits: > 14-22 Indian (excl. Scout)
Wiring harness for connecting a trailer to the bike. These trailer isolator wiring harnesses isolates the electronics for the trailer from the motorcycle. The trailer isolator wiring comes with relays, which are triggered by the bike. But actual current is drawn directly from the battery so there is no current draw to interfere with the bike´s electrical system. The 5-wire trailer output comes with left, right, brake, turn & ground wires. Fits: > 14-22 Indian (excl. Scouts)
Replacement diagnostic and reflash cable to connect the Power Vision 3 module to your bike. 64 (162cm) long. **Dynojet product not available to purchase by Dealers located in the UK** Fits: > Indian
This Trask Performance V-Line handlebar transforms the docile Scout to a more agressive ride, just what the bike needs. - Seamless DOM mild steel construction - Black powder coated - 1 bar diameter - 7/8 grip and clamping area - Drilled for internal wiring - Notched for Throttle-By-Wire - Approx. dimensions: Width: 33.5 (85cm). Pullback: 5 (12.7cm). Height: 5.5 (14cm) Fits: > 15-22 Indian Scout models
Gloss black aluminum. Direct replacements for stock levers deliver clean, classic styling to match the smooth lines of the Indian Scout. Clutch and brake lever placement is similar to stock. Fits: > 15-16 Indian Scout (NU)
1-1/4 steel handlebar; inc.l billet alu junction clamps that rotate towards or away from the rider for their desired comfort needs; Dimensions: 12 30.5cm) rise x 8.5 (21.6cm) pullback x 37 (94cm)wide (adjusted) Fits: > 14-17 Indian Chieftain (Non-navigation models only) (NU)
1-1/4 steel handlebar; incl billet alu junction clamps that rotate towards or away from the rider for their desired comfort needs; Dimensions: 12 30.5cm) rise x 8.5 (21.6cm) pullback x 37 (94cm)wide (adjusted) Fits: > 14-17 Indian Chieftain (Non-navigation models only) (NU)
Slightly larger profile, and includes 1/4 (6.35mm) spacers for improved foot positioning and support. Proprietary EPDM premium rubber compound offers reduced vibration for long-haul comfort. Inserts measure 15.5 (39.4cm) long x 5.75 (14.6cm) at their widest point. Fits: > 14-20 Indian (excl. Scout, FTR)
Slightly larger profile, and includes 1/4 (6.35mm) spacers for improved foot positioning and support. Proprietary EPDM premium rubber compound offers reduced vibration for long-haul comfort. Inserts measure 15.5 (39.4cm) long x 5.75 (14.6cm) at their widest point. Fits: > 14-20 Indian (excl. Scout, FTR)
Wiring adapter; Provides plug-&-play installation of Kuryakyn Orbit LED spotlamps and eliminate the hassle of cutting and splicing the stock wiring harness. Fits: > 14-20 Indian Chieftain & Roadmaster with OEM spotlamps
Black; 13 (33cm) wideNote 2: Will not work with stock solo seat. Will not fit Roadmaster models unless trunk and lighting harness are removed. Fits: > Indian: 14-21 Chief; 14-22 Chieftain; 14-22 Dark Horse; 15-22 Roadmaster; 16-22 Springfield
Plug 'n Play for running light, brake light and turn signal functions to new LED taillight and LED rear turn signals. This module has a built-in load equalizer to prevent rapid flashing turn signals. Comes with a new rear fender wiring harness. Complete with installation instructions. Fits: > 14-22 Indian Scouts (excl. Bobber) when converting to LED taillight & LED turn signals
Long version: This kit requires the removal of the original headlamp mask. Turn signals and brackets must be removed. Gloss black powder coated CNC machined aluminum covers. Fits between the upper and lower triple tree for that massive muscle bike look. Mounts with included set-screws. Fits: > Indian: 18-22 Scout Bobber
SCA extension for clip systemThe extension is suitable for isolated system. Technical data :extension length : 30 mm,temperatures : +15°C to +120°C, short term 150°C,max. torque : 5.0 Nm.