MD-410C Clamp Meter

MD-410C Clamp Meter

AC voltage: 4-600 V, AC current: 400 A, automatic shutdown: yes, non-contact AC voltage detection: no, DC voltage: 400 mV - 600 V, DC current: 400 A, electrical resistance: 400 Ohm - 40 MOhm, low battery indication: yes, clamp multimeter: yes, contact AC voltage detection: no, temperature measurement: -20 °C to +1 000 °C, power supply: 2 × 1.5 V AAA (included), display backlight: no, sales package: 1 pcs, blister, size: 38 × 71 × 194 mm, circuit continuity: yes, part of delivery: battery, manual, measuring tips, battery test: no, diode test: yes, transistor test: no, range selection: automatic, recording max. value: no, record of measured value: yes, display: 3 3/4 digit

koupit
Klešťový multimetr MD-410C

Klešťový multimetr MD-410C

AC napětí: 4–600 V|AC proud: 400 A|automatické vypnutí: ano|bezkontaktní detekce AC napětí: ne|DC napětí: 400 mV – 600 V|DC proud: 400 A|elektrický odpor: 400 Ohm – 40 MOhm|indikace slabé baterie: ano|klešťový multimetr: ano|kontaktní detekce AC napětí: ne|měření teploty: -20 °C až +1 000 °C|napájení: 2× 1,5 V AAA (součástí balení)|podsvícení displeje: ne|prodejní obal: 1 ks, blistr|rozměr: 38 × 71 × 194 mm|součást dodávky: baterie, návod, měřicí hroty|spojitost obvodů: ano|test baterií: ne|test diod:

koupit

EMOS M0400 Multimetr klešťový EM400 (EMOS M0400)

EMOS M0400 Multimetr klešťový EM400 využijete jak na běžnou údržbu elektrických zařízení, tak i v budování nových elektrických rozvodů. Díky tomuto multimetru budete mít při práci s elektřinou tu pravou jistotu. Výhody produktu Možnost měření AC/DC proudu až do 400 A.Tlačítko pro záznam právě naměřené hodnoty.Automatická volba rozsahů. Rozšířený popis Klešťový multimetr MD-410C Špičkový model v nabídce multimetrů nabitý funkcemi, který s přehledem zvládne klasické měření v domácnostech i odborn

koupit
Emos MD-410C | Klešťový ampérmetr do 400 A | M0400

Emos MD-410C | Klešťový ampérmetr do 400 A | M0400

Univerzální klešťový ampérmetr MD-410C (pro měření AC i DC proudu) s univerzálním použitím také jako multimetr (měření napětí AC/DC, měření odporu, test)

koupit
Multimetr klešťový MD-410C M0400

Multimetr klešťový MD-410C M0400

Multimetr využijete jak na běžnou údržbu elektrických zařízení, tak i v budování nových elektrických rozvodů. Díky tomuto multimetru budete mít při práci s elektřinou tu pravou jistotu.

koupit
Přidat hodnocení
Water meter shaft round PP small

Water meter shaft round PP small

This water meter shaft is made of 6 and 8 mm thick polypropylene plates, which are welded together. It is used for the location of the water meter when supplying objects to the water supply. The manhole is sufficiently reinforced and therefore in cases where there is no ground water and the manhole will not be mobile or located close to the road, it is sufficient to place the manhole on the underlying concrete and to fill it evenly with sand or sieved soil. Although the manhole is watertight, in the event

koupit
Water meter shaft circular PP medium

Water meter shaft circular PP medium

This water meter shaft is made of 6 and 8 mm thick polypropylene plates, which are welded together. It is used for the location of the water meter when supplying objects to the water supply. The manhole is sufficiently reinforced and therefore in cases where there is no ground water and the manhole will not be mobile or located close to the road, it is sufficient to place the manhole on the underlying concrete and to fill it evenly with sand or sieved soil. Although the manhole is watertight, if groundwat

koupit
MD-310C Clamp Meter

MD-310C Clamp Meter

AC voltage: 2-600 V, AC current: 2-600 A, automatic shutdown: yes, non-contact AC voltage detection: no, DC voltage: 200 mV - 600 V, DC current: no, electrical resistance: 200 Ohm - 20 MOhm, low battery indication: yes, clamp multimeter: yes, contact AC voltage detection: no, temperature measurement: no, power supply: 2×3 V CR2032 (included), display backlight: no, sales package: 1 pcs, blister, size: 36 × 76 × 190 mm, circuit continuity: yes, part of delivery: battery, manual, measuring tips, battery tes

koupit
Daytona, bar end D-mirror. Number 3

Daytona, bar end D-mirror. Number 3

- Used to clamp to the end of the handlebar - With an aluminum mirror head and aluminum stem - For left or right side use - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - EC approved Fits: >

koupit
Daytona, bar end D-mirror. Number 4

Daytona, bar end D-mirror. Number 4

- Used to clamp to the end of the handlebar - With an aluminum mirror head and aluminum stem - For left or right side use - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - EC approved Fits: >

koupit
Daytona, bar end D-mirror. Number 5

Daytona, bar end D-mirror. Number 5

- Used to clamp to the end of the handlebar - With an aluminum mirror head and aluminum stem - For left or right side use - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - EC approved Fits: >

koupit
Daytona, bar end D-mirror. Number 6, short stem

Daytona, bar end D-mirror. Number 6, short stem

- Used to clamp to the end of the handlebar - With an aluminum mirror head and aluminum stem - For left or right side use - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - EC approved Fits: >

koupit
Daytona, bar end D-mirror. Number 6, long stem

Daytona, bar end D-mirror. Number 6, long stem

- Used to clamp to the end of the handlebar - With an aluminum mirror head and aluminum stem - For left or right side use - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - EC approved Fits: >

koupit
Daytona, bar end D-mirror. Number 7, short stem

Daytona, bar end D-mirror. Number 7, short stem

- Used to clamp to the end of the handlebar - With an aluminum mirror head and aluminum stem - For left or right side use - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - EC approved Fits: >

koupit
Daytona, bar end D-mirror. Number 7, long stem

Daytona, bar end D-mirror. Number 7, long stem

- Used to clamp to the end of the handlebar - With an aluminum mirror head and aluminum stem - For left or right side use - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - EC approved Fits: >

koupit
Daytona, bar end D-mirror. Number 8, short stem

Daytona, bar end D-mirror. Number 8, short stem

- Used to clamp to the end of the handlebar - With an aluminum mirror head and aluminum stem - For left or right side use - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - EC approved Fits: >

koupit
Daytona, bar end D-mirror. Number 8, long stem

Daytona, bar end D-mirror. Number 8, long stem

- Used to clamp to the end of the handlebar - With an aluminum mirror head and aluminum stem - For left or right side use - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - EC approved Fits: >

koupit
Daytona, clamp-on D-Mirror-19 Half Moon. Black. L&R

Daytona, clamp-on D-Mirror-19 Half Moon. Black. L&R

Easy clamp-on mirror for 7/8 (22.2mm) handlebars. Installs with a 2-piece clamp so allows a quick-install without removing any other parts on the bar. Can alternatively be used as bar end mirror. - Left or Right side use - Material mirror head: ABS - Material mirror arm: Nylon - Sold each - Weight 157 gram - E-marked - Adjustable angle Fits: > Universal

koupit
Daytona, bar end D-mirror. Number 9 (L&R side set)

Daytona, bar end D-mirror. Number 9 (L&R side set)

- Short stem - For left and right side use - Used to clamp to the end of the handlebar - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - With an ABS mirror head and aluminum stem Fits: >

koupit
Daytona, bar end D-mirror. Number 10 (L&R side set)

Daytona, bar end D-mirror. Number 10 (L&R side set)

- Short stem - For left and right side use - Used to clamp to the end of the handlebar - The inner diameter of clamp is 30mm - Includes 2 aluminum clamp inserts to adapt for 22.2mm & 25.4mm diameter handlebars - With an ABS mirror head and aluminum stem Fits: >

koupit